P13.ai, Using the battery – Nextar MP907 User Manual

Page 13

Advertising
background image

• If the power is switched on while the battery pack is not fully charged, the player operation
may sometimes become unstable. Be sure to charge the battery pack fully before use.

• Battery will be recharged slowly in AC power adapter operation mode.
Battery also will be recharged while the player stand by, with AC power adapter connected.

• When the battery is connected, after power is turned on, the LED indicator on battery pack
will show the battery state. while the battery is charging, the LED indicator shows RED
color. While the charging is finished, the LED shows GREEN. While the battery has
worked 3 hours, the LED shows flashing RED.

Detaching the battery pack from the player

The battery case can be detached from the player as described below.

1. Set the power switch of the player to off.

2. Press

B

lightly to release the battery lock

and simultaneously push

A

to remove the

battery pack from the player

Using the Battery

Track1

Track2

Track3

Track4

Track5

CDs

Track1

Track2

Track3

Track4

Track5

CDs

Power
adapter

Power
adapter

Notes for recharging

Attaching the battery pack and player

Attach the battery pack and player to the
battery case as described below:

1.

2.

3.

Using the Battery

When the battery pack is hot, it may take longer than usual time for recharging or may
sometimes be unable to be recharged. Wait for the battery pack to cool down before
recharging.

If the recharge lamp will not light, remote and fit the battery pack to the battery charger
again.

To protect the battery pack, do not recharge a fully charged battery pack repeatedly.
Repeated overcharging may deteriorate the battery performance.

The battery pack may become hot during recharging. This is not malfunction.

When the battery pack is recharged in a hot environment, it may not recharge fully.

The temperature during recharging affects the recharging efficiency. Recharging is most
efficient between temperatures of 10˚C and 30˚C. Place the battery charger in a place
within this temperature range whenever possible.

Align the guide hole on the rear of
the player with the rear guide on
the battery

Insert the battery pack to the unit
and then slide to the A direction
until a click is heard.

Now the player can be operated.

When the battery pack is fully
charged, the player can play DVDs
for over 3 hours continuously.

LED (red, green or flashing red)

23

24

Advertising