Nortel Networks Passport Module 8672A - Manual (Page 138)

138 Chapter 6 Configuring the Passport 8672ATM Module
209195-A
Figure 63 IPX VLAN, Insert dialog box
Table 49 describes the IPX VLAN, Insert dialog box fields.
5 In the NetAddr field, configure the IPX network numbers for the VLAN.
6 In the Encap field, click the encapsulation type.
7 Click Insert.
The IPX VLAN, Insert dialog box closes, and the IPX tab is redisplayed.
8 Click Close.
Enabling IPX forwarding
To enable IPX forwarding on both VLANs:
1 From the Device Manager menu bar, choose IPX Routing > IPX.
The IPX dialog box opens with the Globals tab displayed (Figure 64) .
Table 49 IPX VLAN, Insert dialog box fields
Field Description
NetAddr The IP address of this VLAN.
Encap Encapsulation type: ethernetii, snap, llc, or raw.