Nextar K40 - Manual (Page 7)

1. Right-click the Plug and Play icon in the taskbar and select "safely delete the hardware."
2. Select the hardware to stop, and click Stop.
3. Select the driver to stop, and click OK.
4. Click Close to finish the operation.
Disconnection
Caution
Rechargeable 2000MAh Li-Polymer Battery is included with this product, and is used to
supply power when playing music, movies or connecting to a computer as an external
hard disk.
Charge
Recharge Mode
Insert the SD/MMC card and press and hold the POWER button
for 3 seconds. When the POWER indicator light turns red, the
Power is on.
Press and hold the POWER button for 3 seconds. When the POWER
indicator light turns off, the Power is off.
Full Nearly empty Empty
Power Indicator
Power on / Power off
Power on
Power off
Tips
There are 9 icons in the main menu interface: video, music, picture, e-book, recording,
folder, resume, radio and setting. Volume, power and time are indicated at the bottom
right.
Main Menu Interface
Main Menu
Player's Function Operation Introduction
The exterior sound source connection:
Connect the PC to the exterior sound
source via the Line-in cable Equipment.
Stereo earphone connection: Insert the
stereo earphone to the earphone jack.
Connect to the TV for playing:
Use an AV cable and the AV Out
jack to connect the device to
the television's AV In jack.
Connect with the TV to record: With
the AV cable, connect the TV input
jack with the mainframe AV In jack.
Caution: Damage may be caused to this product
if it is incorrectly disconnected from the computer.
The power adapter can be connected to the player's power adapter jack to recharge
directly. During recharging, the indicator light is red. When charging while the power is on,
the icon will flash, once the battery is full, the icon will stop flashing and display "charge
finished".
The battery life while playing films is about 240minutes.
The battery life while playing music is about 540minutes.