Using the detergent, Setting and starting a programme setting mode, Starting a programme without delay start – AEG ELECTROLUX F 77008 W 0 P User Manual

Page 37

Advertising
background image

USING THE DETERGENT

20

30

M AX

1

2

3

4

+

-

A

B

C

CAUTION!
Use only detergents for dish-
washers.

1.

Press the release button (B) to
open the lid (C).

2.

Put the detergent in the compart-
ment (A) .

3.

If the programme has a prewash
phase, put a small quantity of de-
tergent on the inner part of the ap-
pliance door.

4.

If you use detergent tablets, put
the tablet in the compartment (A).

5.

Close the lid. Make sure that the
release button locks into position.

Do not use more than the cor-
rect quantity of detergent. Refer
to the instructions on the deter-
gent packaging.

Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro-
grammes.

SETTING AND STARTING A
PROGRAMME

Setting mode

The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come

on.

• The display shows two horizontal sta-

tus bars.

If the control panel shows other condi-
tions, press and hold Delay and Start
at the same time until the appliance is
in setting mode.

Starting a programme without
delay start

1. Open the water tap.
2. Press the on/off button to activate

the appliance.

3. Close the appliance door.
4. Make sure that the appliance is in

setting mode.

5. Press Program again and again un-

til the indicator of the programme
that you want to set comes on.
• The programme duration flashes

in the display.

• The phase indicators of the set

programme come on.

6. If you want, you can set the options.
7. Press Start. The programme starts.

• Only the indicator of the phase in

operation stays on.

ENGLISH

37

Advertising