Vehicle information display, Instrument brightness control/trip change button – NISSAN 2009 Armada User Manual
Page 15
CLOCK SET/ADJUSTMENT
NAVIGATION SYSTEM ONLY (if so equipped)
Press the SETTING button, then select the
“Clock” key using the NISSAN controller
and press the ENTER button to access the
following clock settings:
Ⅲ On-screen Clock – When this item is
turned to ON, a clock is always dis-
played in the upper right corner of the
screen. The clock is automatically ad-
justed by the GPS system.
Ⅲ Clock Format – Choose either the 12-
hour clock display or the 24-hour clock
display.
Ⅲ Offset Adjust – Adjust the time by increasing or decreasing per minute.
Ⅲ Daylight Saving Time – Turn this item to ON for daylight savings time application.
Ⅲ Time Zone – Choose the time zone.
VEHICLE INFORMATION DISPLAY
When the INFO button
is pressed, the following modes will display
on the screen:
Ⅲ Warnings (if there are any)
Ⅲ Range (average distance to empty)
Rotate the dial
to highlight the desired mode. Press the INFO
button to enter the highlighted mode.
INSTRUMENT BRIGHTNESS CONTROL/TRIP CHANGE BUTTON
Ⅲ The instrument brightness control operates when the headlight
control switch is in the
or
position.
Ⅲ Turn the control to adjust the brightness of the instrument panel
lights.
Ⅲ Press the change button to select trip computer features.
13