Nortel Networks 1000ASE-XD - Manual (Page 89)

Chapter 3 Using the console interface 89
Using the BayStack 420 10/100/1000 Switch
To return to the previous menu, press [Ctrl]-R.
To go to the next screen in a series, press [Ctrl]-N.
To return to the main menu at any time, press [Ctrl]-C.
Press [Backspace] to delete entered text.
Options that appear in brackets (for example, [Enabled]) are user-settable options.
Screen fields and descriptions
Figure 39 shows a map of the CI screens. The remainder of this chapter describes
the CI screens and their fields, beginning with the main menu.
Figure 39 Map of console interface screens
IP Configuration/Setup
SNMP Configuration
System Characteristics
Switch Configuration
Console/Comm Port Configuration
Identify Unit Numbers
Renumber Stack Units
Display Hardware Units
Spanning Tree Configuration
TELNET Configuration
Software Download
Configuration File
Display Event Log
Reset
Reset to Default Settings
Logout
Main Menu
MAC Address Table
MAC Address-Based Security
VLAN Configuration
Port Configuration
High Speed Flow Contro Configuration
MultiLink Trunk Configuration
Port Mirroring Configuration
Display Port Statistics
Clear Port Statistics
Spanning Tree
Display Spanning Tree Switch Setting
Only appears when the switch is participating in a stack configuration.
Only appears when a gigabit MDA is installed in one or more units in a stack configuration.
VLAN Configuration
VLAN Port Configuration
VLAN Display by Port
MultiLink Trunk Configuration
MultiLink Trunk Utilization
BS45041F
1
1
1
2
2
MAC Address Security Configuration
MAC Address Security Port Configuration
MAC Address Security Port Lists
MAC Address Security Table