For your safety, Rear panel – Nokia 9650S User Manual

Page 3

Advertising
background image

GB 4

Keep a clear space around the Mediamaster to allow for sufficient ventilation.
Do not cover the Mediamaster or place it on a unit that emits heat.

!" Use a soft cloth and a mild solution of dish washing liquid to clean the casing.
!" Never allow liquids, spray or other materials to come into contact with the inside of the

Mediamaster.

!" Service should be carried out only at a Nokia authorized service center.
!" Do not connect or modify cables when the Mediamaster is plugged in.
!" Do not remove the cover.
!" Do not allow the unit to be exposed to hot, cold or humid conditions.

!"

Please note that the only way to isolate the Mediamaster completely from the 230 V mains supply

is to unplug the mains lead!







FOR YOUR SAFETY

Rear panel

RS232

For a PC.

LNB input

Satellite dish
input
(F-connector).

LNB output

Satellite signal (IF) output

with loop through. For
connection to the other
satellite receiver if needed.

TV SCART

For the audio
/video input of the
TV set.

TV AERIAL

For a terrestrial
(conventional)
TV aerial.

VCR SCART

For connection to a
VCR or an analogue

satellite receiver.

VIDEO OUTPUT

Composite video
signal output for a
TV set.

AUDIO L R

Stereo outputs for
connection to a HiFi
system.

AC INLET

230 V AC
50 Hz

TV/VCR

For an RF-Cable

to the aerial
input of the TV
or VCR.

MODEM

For connection
to an external

MODEM

Advertising