Northern Industrial Tools 4200NH - Manual (Page 9)

9
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Adjusting depth of cut
CAUTION:
• After adjusting the depth of cut, always tighten the
clamping screw securely.
Loosen the clamping screw on the depth guide and move the
base up or down. At the desired depth of cut, secure the
base by tightening the clamping screw.
For cleanser, safer cuts, set cut depth so that no more than a
blade tooth length projects below workpiece surface. Using
proper cut depth helps to reduce potential for dangerous
KICKBACKS which can cause personal injury.
Bevel cutting
Loosen the clamping screw on the bevel scale plate on the
front of the base. Set for the desired angle (0° - 45°) by tilting
accordingly, then tighten the clamping screw securely.
Sighting
For straight cuts, align the A position on the front of the base
with your cutting line. For 45° bevel cuts, align the B position
with it.
1. Clamping screw
001238
1
1. Clamping screw
2. Bevel scale plate
1
2
001239
1. Base plate
001240
A
1
B