ZANKER KBT 23001 SB User Manual
Page 24
Ha
Hb
Hd
Hc
7
Disconnect the parts
Ha, Hb, Hc and Hd
21 mm
21 mm
~50 mm
~50 mm
90
o
90
o
8
Install the part Ha on
the inner side of the
kitchen furniture.
Ha
Hc
9
Push the part Hc on
the part Ha.
Hb
Ha
8 mm
10
Open the appliance
door and the kitchen fur-
niture door at an angle of
90°.
Insert the small square
(Hb) into guide (Ha).
Put together the appli-
ance door and the furni-
ture door and mark the
holes.
Ha
8 mm
K
11
Remove the brackets
and mark a distance of 8
mm from the outer edge
of the door where the nail
must be fitted (K).
Hb
12
Place the small
square on the guide
again and fix it with the
screws supplied.
Align the kitchen furniture
door and the kitchen fur-
niture door with the clear-
ance of the slots in the
part Hb.
Hb
Hd
13
Press the part Hd on
the part Hb.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly to the
cabinet.
Important! If the ambient temperature is low (for
example, in the Winter), the size of the gasket
decreases. The size of the gasket increases when the
ambient temperature increases.
24