NetComm 5330 - Manual (Page 7)

Mitel 5330 IP Phone
Quick Reference User Guide
6
2. Changing the VOIP Interface.
Programming the IP Phone involves entering the ICP IP ADDRESS. This IP address will
be provided by the Mitel system administrator. The WAN address is for users who will
be accessing Remotely and internally. The LAN address is used for local users when
no external internet connection is available. If you want to use the LAN address, you
must change the VOIP Interface to IPLAN.
1. Connect to the Broadband Module programming Interface using the Wizard or
Browser
Click VoIP from the Setup panel in the main Broadband Module screen.
2. Scroll down and Click the link Change Advanced VoIP Settings here ...
IP Phone Mitel 5330 Quick Refere7 7 04/07/2008 15:04:14