NEC XT9000 - Manual (Page 48)

E – 41
External Control RS232C(1) D-sub 9 pin
Contact Closure
Switcher
(2) D-sub 15 pin In/Out
Addressable Remote Control (wired / wireless)
Power Requirement 200-240 VAC, 50/60Hz
Input Current 14 A
Power Consumption 2.8 kW
Mechanical
Installation Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Stacking: Up to 2 projectors can be gravity stacked
Dimensions 26.8" (W) x 38.3" (D) x 14.2" (H) with foot (not including lens hood and handle)
680 mm (W) x 973 mm (D) x 360 mm (H) with foot (not including lens hood and handle)
Net Weight 185.3 lb (84Kg) (without lens)
Environment Operational Temperature 40˚ to 95˚F / 5˚ to 35˚C,
Humidity: 20-80% non-condensing
Storage: 14˚ to 122˚F / -10˚ to 50˚C
Humidity: 20-80% non-condensing
Regulations USA UL 1950 FCC Class A
Canada CSA950 ( C-UL )
Europe EN60950 EN55022 Class A EN55024 EN61000-3-2 EN61000-3-3
Japan J60950 VCCI
Oceania EN60950 AS/NZS3548 Class A
Asia EN60950 CISPR22 Class A
*1: Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 1 pixel or less around the perimeter (when projection
upward angle is 0˚).
*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15 degrees from the horizontal.
Specifications are subject to change without notice.
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.