Numark Industries CDN-12 - Manual (Page 12)

CDN-12
BEAT MATCHING USING PITCH BEND
BPM’s (Beats Per Minute) are the same, however, the drum beats are not matched
This description is for the case of matching the beat of the CD PLAYER to the beat of the music being played from another
source .
After Matching the BPM adjust the pitch
temporarily as follows:
When the CD PLAYER is ahead press the --
or rotate the jog wheel counter clockwise
or
When the CD PLAYER is behind press the +
or rotate the jog wheel clockwise
or
The pitch changes automatically while the + or -- button is being pressed or the jog wheel is rotated. The faster
you rotate the wheel the more you change. Releasing the button or wheel results in a return to the original pitch. (So the
BPM’s are once again the same.)
USING THE LOOP
This function is repeating certain areas of the CD. Such as vocal stabs or for allowing the beginning of a song repeat itself
so you may leave the DJ console and interact directly with your crowd
To set a loop start point just press the “LOOP” button while the CD is playing when it reaches the desired start point.
Press the
"LOOP" button
LOOP interval
LOOP Position on the disc
Return to LOOP in point
LOOP
Continuation of play
after third press
of "LOOP" button
Press the
"LOOP" button
again
To start looping press the “LOOP” button again when the desired loop end point is reached. Looping is not seamless on
this unit. When it reaches the end point again it returns to the start point and continues to repeat this action. When the
“LOOP” button is pressed again the CD will continue on when it gets to the end point.
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries 12 http://www.numark.com