NetComm IP DSLAM NCT480 - Manual (Page 47)

YML856 Rev3 NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
www.netcomm.com.au 4
Commit and Reboot
The commit and reboot configuration dialog allows you to commit, reboot or restore factory configuration
the system.
Figure - Commit & Reboot Configuration Dialog
Commit Configuration
Commit the system to save all configuration information from NVRAM to Flash, all variables change without
commit will be lost due to system (hardware) reboot or power-off.
Figure -10 System Commit
Commit action takes around 20 seconds to accomplish.
Reboot System
Reboot system (restart) takes around 90 seconds to accomplish.
Figure -11 System Reboot