Nikon COLLPIX L22 - Manual (Page 102)

90
Basic Camera Setup: The Setup Menu
Sh
oot
in
g, P
laybac
k an
d Se
tu
p Me
nus
3
Press K.
The new city time zone menu is displayed.
4
Press J or K to select the travel destination
region (time zone).
When using the camera in an area where daylight saving
time is in effect, press
H to adjust the camera’s time for
daylight saving time. W will be displayed in the top of the
monitor and the time will advance one hour. To turn off
the daylight saving time setting, press
I.
Press k to enter the travel destination.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
1 5 : 3 0
Time zone
Home time zone
Travel destination
1 5 / 0 5 / 2 0 1 0
Exit
London, Casablanca
Back
1 0 : 3 0 - 0 5 : 0 0
EDT:
New York
Toronto
Lima
B
The Clock Battery
The camera’s clock is powered by a clock battery that is independent of the batteries that powers
the camera. The clock battery charges when the main batteries are installed or an AC adapter is
connected, and can provide several days of backup power after about ten hours of charging.
C
w (Home Time Zone)
• To switch to the home time zone, choose w in step 2 and press k.
• To change the home time zone, choose w in step 2 and perform steps 3 and 4, to set the home
time zone.
C
Daylight Saving Time
When the summer saving time begins or ends, turn the daylight saving time option on or off using
the home time zone display in Step 4.
D
Imprinting the date on pictures
After setting the date and time, set the
Date imprint setting in the setup menu (A 94). Once Date
imprint is set, the shooting date and time can be imprinted on the image data when taking
pictures.