Nortel Networks Passport 8001PS - Manual (Page 7)

5
7. Connect the power cord to the power supply
and to a power outlet that is on a circuit with
no other equipment connected to it.
Connect each power supply in the chassis to
a separate AC circuit.
8. Turn on the power switch.
9158FA
Note: In a chassis that requires two
power supplies (nonredundant
configuration), you must turn on both
units within 2 seconds of each other.
If you wait longer to turn on the
second power supply, both power
supplies will latch off. To correct this
condition, turn off both power
supplies, wait at least 30 seconds, and
turn both power supplies on again
within 2 seconds.
9159FA
Specifications
Input current (maximum) 12 to 6 A
Input voltage 100 to 240 VAC
Line Frequency 47 to 63 Hz
Power consumption 1112 W
Thermal rating 3792 BTU/hr maximum