NuTone LA-203RWH User Manual

Plug-in door chime receiver, La-203rwh, If you should encounter a problem

Advertising
background image

CHANGING THE SECURITY CODE
ON CHIME RECEIVER

To use the LA-203RWH Chime Receiver with your NuTone
Wireless Chime, set code in this Chime Receiver to match code
set in your Pushbutton. Here's how:
1. Remove cover of Pushbutton by inserting screwdriver in the

slot at the bottom of the Pushbutton and then gently rock the
Pushbutton cover apart from the base. (Figure 1) Locate
vertical row of black jumpers on right side of Pushbutton.
(Figure 3 Detail)

2. Remove the screw from the access cover on back of Chime

Receiver, then remove cover. (Figure 2)

3. Set the code switches in the Chime Receiver to match the

black jumpers in the Pushbutton. If a black jumper is in place,
then the corresponding switch on the Chime Receiver must be
set in the "ON" position. (Figure 3)

For example: if jumper #1 is in place, code switch #1
should be in the ON position.

4. After setting the switches, replace the cover and screw on

back of Chime Receiver.

5. Replace Pushbutton cover.

Product specifications subject to change without notice.

4820 Red Bank Road, Cincinnati, Ohio 45227

Printed in China, Rev. 3/02 Part No. 88299

If you should encounter a problem.

PROBLEM

1. Chime does not sound.

• Check position of battery (+/–) in

Pushbutton.

• Make sure Pushbutton is not located on a

metal surface.

• Check that outlet on Chime Receiver has

power.

• Check Pushbutton and Chime codes.

These codes must match.

2. Chime is activated by

another wireless device.

• Change the security code

in the Pushbutton and Chime Receiver.
These codes must match.

(See detailed instructions below.)

SOLUTION

INSTALLATION &

OPERATING INSTRUCTIONS

READ & SAVE THESE INSTRUCTIONS!

Plug-in
Door Chime Receiver

MODEL:

LA-203RWH

For use with these NuTone wireless products:
LA-203WH, LA-205WH, LA-206WH, LA-206TWH,
LA-207TWH (sold separately)

NuTone

FIGURE 3

FIGURE 2

FIGURE 1

1 2 3 4 5 6

ON

PLUG-IN

CHIME RECEIVER

REMOVE SCREW
AND COVER FROM
BACK OF CHIME
RECEIVER

No electrical wiring needed!

To install:

1. Simply plug chime receiver into any standard electrical

wall outlet within 100 feet of Pushbutton.
(Chime is powered by household current.)

2. Chime will sound when Pushbutton is pressed.

NOTE: Chime Receiver will not work alone.

One Year Limited Warranty

WARRANTY OWNER:

NuTone warrants to the original consumer purchaser of its products that

such products will be free from defects in materials or workmanship for a period of one (1) year from
the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.

During this one year period,

NuTone will, at its option, repair or replace, without charge, any

product or part which is found to be defective under normal use and service. THIS WARRANTY
DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES, FILTERS, DUCT,
ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not
cover (a) normal maintenance and service or (b) any products or parts which have been subject to
misuse, negligence, accident, improper maintenance or repair (other than by NuTone), faulty
installation or installation contrary to recommended installation instructions.

The duration of any implied warranty is limited to the one year period as specified for the express
warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above
limitation may not apply to you.

NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT NUTONE’S OPTION, SHALL BE THE
PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. NUTONE SHALL
NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT
OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE.

Some states do not allow

the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state. This warranty supersedes all prior warranties.

WARRANTY SERVICE: To qualify for warranty service, you must (a) notify NuTone at the
address stated below or telephone 1/800-543-8687, (b) give the model number and part
identification and (c) describe the nature of any defect in the product or part. At the time of
requesting warranty service, you must present evidence of the original purchase date.

Date of Installation

Builder or Installer

Model No. and Product Description

IF YOU NEED ASSISTANCE OR SERVICE:

For the location of your nearest NuTone Independent Authorized Service Center:

Residents of the contiguous United States

Dial Free 1-800-543-8687

Please be prepared to provide:

Product model number • Date and Proof of purchase • The nature of the difficulty

Residents of Alaska or Hawaii should write to:

NuTone Inc. Attn: Department of National Field

Service, 4820 Red Bank Road, Cincinnati Ohio 45227-1599.
Residents of Canada should write to:

Broan-NuTone Canada, 1140 Tristar Drive,

Mississauga, Ontario, Canada L5T 1H9.

Rev. 03/2001

TOP

P.C.

BOARD

BATTERY

LOCATION

SECURITY

CODE

SETTING

EXAMPLE: CHANGING CODE SETTING

SET 1, 3 & 6

SWITCHES

TO “ON”

SLOT

TO OPEN

COVER

“PUSH”

Advertising