System setup, Continued – Norcent Technologies DP300 User Manual
Page 11
10
Follow the instructions above in DVD Menu Setup in combination with the desired option from
graphic below.
System Setup
There are three video output choices: Use the CVBS output if the S-Video output jack has been
selected; use the RGB output if the RGB output jack has been selected; or use the YUV output
is the component output jack has been selected.
Angle Mark
Follow the instructions above in DVD Menu Setup in combination with the desired option
from graphic below.
When a DVD with multiple angles is played, a particular camera angle may be selected by the
viewer.
OSD Lang.
Follow the instructions above in DVD Menu Setup in combination with the desired option
from graphic below.
This is used to set the language of the setup menu and screen display.
Captions
Follow the instructions above in DVD Menu Setup in combination with the desired option
from graphic below.
SPEAKER SETUP
This submenu option includes downmix mode and main.
Downmix Mode
Follow the instructions above in DVD Menu Setup in combination with the desired option from
graphic below.
ANGLE MARK
ON
OFF
GENERAL
MAIN PAGE
TV DISPLAY
TV TYPE
VIDEO OUTPUT
OSD LANG
AUDIO OUTPUT
CAPTIONS
ANGLE MARK
SCREEN LANGUAGE
ENGLISH
GENERAL
MAIN PAGE
TV DISPLAY
TV TYPE
VIDEO OUTPUT
ANGLE MARK
CAPTIONS
OSD LANG
ON
OFF
GENERAL
CAPTIONS
MAIN PAGE
TV DISPLAY
TV TYPE
VIDEO OUTPUT
ANGLE MARK
OSD LANG
CAPTIONS
LT/RT
STEREO
SPEAKER SETUP
DOWNMIX
MAIN
PAGE
DOWNMIX
VIDEO OUTPUT
CVBS
RGB
YUV
GENERAL
TV DISPLAY
TV TYPE
ANGLE MARK
OSD LANG
CAPTIONS
VIDEO OUTPUT
MAIN PAGE
11
System Setup
The audio setting includes audio out, OP mode, L+R, dynamic, and LPCM out.
Audio Out
Follow the instructions above in DVD Menu Setup in combination with the desired option from
graphic below.
This DVD player provides three types of audio output:
1. Analog Needs connection of terminals on the back panel to the left and right speakers.
2. SPDIF/RAW This surrounding form is realized through optical and coaxial output of Dolby
Digital signals from the back panel.
3. SPDIF/PCM The same as #2.
OP Mode
Follow the instructions above in DVD Menu Setup in combination with the desired option from
graphic below.
Both of the line output and RF adjustment options are applicable in all conditions. Due to it's
suitability and convenience in most cases, line output is used. In some conditions, for instance
when headphones are used, the RF mode may be used.
L+R
Follow the instructions above in DVD Menu Setup in combination with the desired option from
graphic below.
If an amplifier/decoder is being used with this DVD player and it has Dolby Digital output, the
following selections may be made: stereo, left, right, or mixed sound accordingly.
Dynamic
Follow the instructions above in DVD Menu Setup in combination with the desired option from
graphic below.
To avoid a disturbing trembling sound, the dynamic function lowers the volume without
changing the original tone.
LPCM Out
Follow the instructions above in DVD Menu Setup in combination with the desired option from
graphic below.
ANALOG
SPDIF/RAW
SPDIF/PCM
AUDIO SETUP
AUDIO OUTPUT
MAIN PAGE
AUDIO OUT
OP MODE
L+R
DYNAMIC
LPCM OUT
LINE OUTPUT
RF ADJUSTMENT
OPERATIONAL MODE SETUP
AUDIO SETUP
MAIN PAGE
AUDIO OUT
L+R
DYNAMIC
LPCM OUT
OP MODE
STEREO
L-MONO
R-MONO
MIX-MONO
L+R SETUP
AUDIO SETUP
MAIN PAGE
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUT
L+R
DYNAMIC RANGE COMPRESSION
PULL
6/8
4/8
2/8
OFF
AUDIO SETUP
MAIN PAGE
AUDIO OUT
OP MODE
L+R
LPCM OUT
DYNAMIC
LPCM48K
LPCM96K
SET LPCM OUTPUT TO 48K OR 96K
AUDIO SETUP
MAIN PAGE
AUDIO OUT
OP MODE
L+R
DYNAMIC
LPCM OUT
continued
PDF created with FinePrint pdfFactory trial version