Trouble shooting – Nikon XT100 User Manual
Page 55
55
15. TROUBLE SHOOTING
Malfunction
Possible Cause
Remedy
Turntable
won't switch
on by pressing
ON/OFF
button (I/O)
1. Turntable isn't
connected to AC
power supply-line.
2. Power cable is not
tightly plugged into its
socket on power
panel.
3. Burnt fuse on
power panel.
1. Connect the
turntable to AC
power supply-
line.
2. Disconnect
the cable from
switching
connector and
plug it in again.
3. Replace fuse
on power panel.
Turntable gets
energized but
indication on
digital panel is
invalid
You plugged cables in
"R", "M" and "A"
sockets prior to
disconnecting the
turntable from AC
power supply-line.
Switch the
turntable off,
connect cables
properly
following the
instruction and
then switch the
turntable on.
Frame
numbers are
changed on
digital
indication
panel but the
turntable
surface won't
move
1. You have violated
the instruction and
photographed the
objects or people
whose weight was
greater than maximal
permissible one.
Rotation gear is
damaged.
2. You often
photograph objects
located far from
turntable centre.
Rotation gear is
damaged.
Contact
Anything3D.