Electronically controlled cameras, Shooting – Nikon CoolPix S500 User Manual

Page 136

Advertising
background image

124

Troubleshooting

Techni

cal
Not

es

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera
may stop functioning. In most cases, this phenomenon is caused by a strong external static
charge. Turn the camera off, remove and replace the battery, and then turn the camera on
again. In the event of continued malfunction, contact your retailer or Nikon representative.
Note that disconnecting the power source as described above may result in the loss of any
data not recorded to internal memory or the memory card at the time the problem occurred.
Data already recorded will not be affected.

Shooting

Date not appearing on pictures

even when [Date imprint] is

enabled

Date does not appear on movies or on

pictures taken using P, N, F, [Contin-

uous], when [On] is selected for [BSS], or

shooting in anti-shake mode.

56, 35,

38, 40,

86, 88,

42

Camera settings reset

Backup battery is exhausted; all settings

were restored to their default values.

102

Problem

Cause/Solution

c

No picture taken when shutter-

release button is pressed

• When camera is in playback mode,

press i or the shutter-release but-

ton.

• When menus are displayed, press

m

.

• Battery is exhausted.

• When flash lamp blinks, flash is charg-

ing.

26

10

20

29

Camera cannot focus

• The intended subject is one with

which autofocus does not perform

well.

• Set [AF assist] in the setup menu to

[Auto].

• Focus error. Turn camera off and then

on again.

25

108

20

Pictures are blurred

• Use flash.

• Use anti-shake mode.

• Use high-sensitivity shooting mode.

• Use vibration reduction.

• Use A.

• Use tripod and self-timer.

28

42

33

107

88

30

Problem

Cause/Solution

c

Advertising