NETGEAR ETHERNET SWITCH SW108 - Manual (Page 13)

Physical Description 2-1
Chapter 2
Physical Description
This chapter explains the hardware features of the NETGEAR Model SW108 Ethernet switch. It is
divided into sections explaining the front and rear panels of the switch. Use the key at the bottom
of each illustration to identify the panel components.
Front Panel
For easier management and control of the switch, familiarize yourself with the ports, LEDs, and
Normal/Uplink push button switches on the front panel, as illustrated in Figure 2-1.
Key:
1 = Power LED
2 = Rx/Tx and Collision LEDs for ports 1 through 8
3 =10 Mbps Ethernet ports1 through 8 with Link and FDX LEDs on each port
4 = Normal/Uplink push button to configure port 8
Figure 2-1. Front panel of the Model SW108 switch
886EA
1 2 3 4 5 6 7 8
Link FDX
Power
1 2 3 4
5 6 7 8
Normal/Uplink
Green = Rx/Tx Yellow = Collision
10 BASE-T ETHERNET SWITCH SW108 10 Mbps
4
3
2
1
SW108.BK Page 1 Friday, June 27, 1997 10:48 AM