Network Technologies DVB-ASI to IP - Manual (Page 8)

ASI-IP-GTW User's Manual
Page 8
1 Introduction
1.1 Purpose of this Manual
This manual describes how to operate the ASI to IP Gateway, hereafter
referred to as the ASI-IP-GTW. It also describes how to install and
maintain the unit. A detailed technical description of the functionality
of the unit is given as part of this document.
The following topics are covered in this manual:
o
General introduction to the ASI-IP-GTW
o
Installation of the Unit
o
Functional description of the Unit
o
Fault finding and maintenance
1.1.1 Who Should Use this Manual
This manual is written for operators and users of the ASI-IP-GTW and
is meant to provide necessary information for installation, operation
and day-to-day maintenance of the unit.
Note: This manual does not include any maintenance information or
procedures which require the removal of covers.
1.1.2 Warnings, Cautions and Notes
1.1.1.1 Heed Warnings
All warnings on the product and in the operating instructions should
be adhered to. The manufacturer can not be held responsible for
injuries or damages where warnings and cautions have been ignored or
taken lightly.
1.1.1.2 Read Instructions
All the safety and operating instructions should be read before this
product is operated.
1.1.1.3 Follow Instructions
All operating and use instructions should be followed.
1.1.1.4 Retain Information
The safety and operating instructions should be retained for future
reference.
Warning: Warnings give information, if strictly observed, will prevent
personal injury and death, or damage to personal property or the
environment.