N-Tron 105TX-POE User Manual
Page 18
Rev. 041008
18
KEY SPECIFICATIONS
Physical
Height:
3.50” (8.89 cm.)
Width:
1.50” (3.81 cm.)
Depth Including Din-Rail Clip:
4.22” (10.72 cm)
Weight:
0.70 lbs. (0.32 kg)
Electrical
Input Voltage:
46-49 VDC
Input Current:
1.6 A @ 48 VDC (under full load)
65 mA @ 48 VDC (no POE in use, switch in full use)
Inrush Current:
26 Amp/1.3 ms @ 48VDC
Input Ripple:
Less than 100 mV
Input Wire Size:
10-20 AWG
Environmental
Operating Temperature:
-40°C to 85°C
Storage Temperature:
-40°C to 85°C
Operating Humidity:
10% to 90% (Non Condensing)
Operating Altitude:
0 to 10,000 ft.
Network Media
10BaseT:
> Cat-3 Cable
100BaseT:
> Cat-5 Cable
100BaseFX:
Multimode: 50-62.5/125µm Fiber
Singlemode: 7-10/125µm Fiber
Fiber Transceiver Characteristics
Fiber Length:
2km*
15km**
40km**
80km**
TX Power Min/Max -19dBm/-14dBm -15dBm/-7dBm -5dBm/0dBm
-5dBm/0dBm
RX Sensitivity Max: -32dBm
-34dBm
-34dBm
-34dBm
Wavelength:
1310nm
1310nm
1310nm
1550nm
*=Multimode ** =Singlemode
Connectors
10/100BaseTX:
RJ45 UTP Port
100BaseFX:
SC or ST Duplex Port
Recommended Minimum Wiring Clearance:
Front: 2” (5.08 cm)
Top: 1" (2.54 cm)