7) connecting the supplied power cable, Onnecting the, Upplied – NEC NP4001/NP4000 User Manual
Page 48: Ower, Able, T connecting the supplied power cable on pa, Tconnecting the supplied power cable
Advertising
2. Installation and Connections
36
t
Connecting the Supplied Power Cable
Refer to the following guidelines to connect the power supply to the projector.
1. Locate the projector correctly. See o Selecting a Location on page
.
2. Ensure Main Power switch is in the off position (O).
3. Connect power cable to mains outlet.
4. Connect power cable to power inlet (AC IN) on the projector, see r Terminal
.
Note:
Make sure that the prongs are fully inserted into both the AC IN and the wall
outlet.
Note:
Ensure that the cables do not create a trip hazard.
Advertising