Nokia CK-10 - Manual (Page 10)

I n s t a l l a t i o n
10
• The car kit should not be installed in the head impact area.
• Do not wire car kit equipment to the high voltage lines of the ignition
system.
• Take care not to cause damage to electrical cables, fuel or brake lines, or
safety equipment during installation work.
• Ensure cables are placed so that they are not subjected to mechanical
wear and tear. Do not place cables under car seats or over sharp edges.
■ Installing the car kit
See the instructions on page 4 for an example of a suitable installation of the
car kit equipment.
You also need to install a phone holder (sold separately) that is compatible
with the mobile phone to be used. If you want to install an external antenna
(sold separately), you either need an antenna coupler that is compatible with
the phone holder in use or a phone holder with a built-in antenna coupler.
When installing the hands-free unit, ensure that it does not block the vents
and is mounted securely and as vibration-free as possible. To mount the unit,
attach the mounting plate supplied with the car kit and secure the hands-free
unit using the screw that goes through the unit and the phone holder.
Installing the hands-free unit (example only)
When mounting the antenna coupler AD-14, AXF-13L or AXF-15S, place the
washer HH-9 between the coupler and the mounting plate.
9236521_CK-10_1_en.fm Page 10 Wednesday, November 3, 2004 5:18 PM