Nokia HS-3W - Manual (Page 10)

G e t t i n g s t a r t e d
10
6. Enter the passcode to associate ("pair") and connect the headset to
the phone. The passcode is marked on the card that is provided in
the sales package of the headset.
Once you have entered the passcode, the phone becomes the default
phone for the headset, if the headset has not been previously paired
with another phone. See also Using the headset with several paired
phones on page 15.
The headset beeps once and an active Bluetooth connection is
displayed by a blinking white indicator light. The headset should now
appear in the phone menu where you can view the Bluetooth devices
that are currently paired with the compatible phone.
7. Start using the headset (see page 12).
Disconnecting the headset from the phone
The headset can be disconnected from the phone, if, for example, you
want to use another Bluetooth device with it. To disconnect the headset,
do one of the following:
• Switch off the headset.
• Disconnect the headset in the phone’s Bluetooth menu.
• Move the headset more than 10 metres away from the phone.
The headset is also disconnected if the battery becomes flat.
Note that you do not need to delete the pairing with the headset to
disconnect it. When you reconnect a paired headset, you will not be
asked for its passcode.
Reconnecting the paired headset to the compatible
phone
To reconnect the headset to the default phone or the last phone used,
switch on the headset. Otherwise, make the connection in the phone’s
Bluetooth menu as instructed in the user’s guide of the phone.
hs-3W_en_1st_tab.fm Page 10 Tuesday, December 16, 2003 10:31 AM