NextBase Gallery 15 - Manual (Page 12)

General Introduction 11
Nextbase Gallery 15 - User
,
s Guide
Nextbase Gallery 15 can be placed on a table top using the integral support. The Gallery 15 can
be positional horizontally or vertically on desired.
1. Pull out the support from the back of the Gallery 15.
2. Rotate the support to either horizontal or vertical modes as required.
3. Adjust the leng th of the support by sliding the "Lock-Unlock latch, and then pull the support
stand to the desired length.
4. Push the latch to lock to fix the position.
5. Lean the gallery 15 back to the desired position.
1 2 3 4 5
1. Choose your favorite 10'' X 8'' frame.
2. Mount Gallery 15 into
3. Then mount the f
(with Gallery 15) into the standard 10'' X 8'' wooden frames,
the supplied Nextbase f .
, and
fix securely.
rame mount
rame mount
Offer the Gallery 15 to the f ensuring that the remote control sensor in aligned with the
remote control window. Press down & click in to place securely.
rame mount
Remote
control window
Remote control sensor
Frame Mount Gallery 15
HOW TO USE THE INTEGRAL STAND SUPPORT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn