Front/back panel, Front panel features, Back panel features – Nuvo Simplese NV-A4DS-UK User Manual

Page 8

Advertising
background image

5

1

2

SOURCE INPUT

L

R

L

R

1

2

3

4

L

R

ZONE 4

FIXED

VAR

LINE OUT

IR OUT

1

3

2

4

SYSTEM

LINK

RS232

STATUS
ON=+12V

MUTE
=0V

SPEAKER AND DATA SIGNALS

ALL PORT CONNECTION

Simplese

CONFORMS TO

UL STD.6500

CERTIFIED TO

CAN/CSA STD.E60065

3033118

C

US

RT

E

E

T

K

N

I

CM

NuVo Technologies Cincinnati Ohio USA

D

RT

E

E

T

K

N

I

FOUR-SOURCE FOUR-ZONE

100~240V 50~60Hz 85W

USE FOR SAT

OR CABLE

NORMAL

USE

56KHz

38KHz

1

2

1

2

3

4

5

6

7

8

9

Front Panel Features

1. Stand-by LED

This LED (light emitting diode) indicates, when lit, that the Simplese amplifier is plugged into
an AC power source.

2. Zone LED

Each of these LEDs indicates, when lit, that its zone keypads are turned on.

Back Panel Features

1. Source Inputs

Each of these stereo RCA inputs receives an audio signal from up to four independent audio
sources.

2. Zone 4 Lineouts

These fixed and variable lineouts are used for attaching additional amplification to the zone 4
audio outputs.

3. IR OUT

These outputs are designed to be used with the included IR (Infrared) emitters to transfer IR
function commands from the zone keypads to the appropriate audio source equipment; see IR
Outputs pg. 10.

4. MUTE

This 3.5mm mono connection is designed to be used in conjunction with the NV-MI1 mute
interface; see Mute Input and the NV-MI1, pg. 15.

5. STATUS

This 3.5mm mono connection provides a constant +5 volt output when a zone is turned on. This
can be used to trigger external equipment.

6. RS232

This is used for bidirectional serial control by third party home automation systems.

7. LINK

This 3.5mm mono output is used to expand the Simplese System from four to eight zones; see
Using the Link Jack to Create Eight Zones, pg. 14.

8. Allport Connection

This 25-pin terminal is used in conjunction with the Allport cable to integrate the zone keypads
and speakers into the system; see Allport Termination and Installation, pg. 9.

9. AC

This is used with the included AC power cable to provide electrical power to the system when
attached to an active AC power outlet.

Advertising