NETGEAR HA311 - Manual (Page 14)

14
Step 2—Install the HA311 Wireless PCI Adapter
HARDWARE DESCRIPTION
The HA311 Wireless PCI Adapter has two interfaces:
♦ A 32-bit PCI connector that connects to any PC with an available PCI slot.
♦ A wireless interface that remains outside of the PC chassis when the
Wireless PCI Adapter is inserted into a PC.
There are two green LEDs, Network (NWK) and Power (PWR), that indicate
the wireless link condition of the HA311 Wireless PCI Adapter with another
wireless node or the associated Access Point.
HARDWARE INSTALLATION
To install the HA311 Wireless PCI Adapter on your PC, please follow the
instructions below:
1. Turn off your PC and unplug the power cord.
2. Remove the PC cover.
3. Choose an available PCI slot and remove the corresponding back plate from
the PC chassis.