National Instruments NI PXI-1006 - Manual (Page 2)

NI PXI-1006 Power Supply Shuttle User Guide 2 ni.com
❑
NI PXI-1006 User Manual (provided with the chassis; also available at
ni.com/support )
❑
No. 1 Phillips screwdriver
Description
Refer to Figure 1 to locate user-accessible components on the power supply
shuttle.
Figure 1. PXI-1006 Power Supply Shuttle Rear Panel
Installation and Maintenance
The information in this section is for qualified service personnel only.
Refer to the Read Me First: Safety and Radio-Frequency Interference
document included with your kit before using the power supply shuttle.
Caution Many components within the PXI-1006 chassis under repair are susceptible to
static discharge damage. Service the chassis only in a static-free environment. Observe
standard handling precautions for static-sensitive devices while servicing the chassis.
Always wear a grounded wrist strap, or equivalent, while servicing the chassis.
Caution Always disconnect the AC power cable before cleaning or servicing the chassis.
1 Chassis Ground Screw
2 Universal AC Input
3 Circuit Breaker
4 Mounting Screws (10x)
5 Fan Speed Selector
6 Remote Power Status and Inhibit Connector
4
1
2
3
AUTO
5 6