NETGEAR ProSafe Wireless Access Point WG102 - Manual (Page 18)

XEPS103 Space-Saving Powerline Network Extender User Guide
10
v1.0, February 2007
f. Enter the password recorded from the label on the back of the selected PowerLine device.
g. Click OK.
h. Repeat this step for all devices that you want attached to your network.
2. Set the network password.
a. Select the Security tab.
b. Type a password in the Private Network Password text box.
c. Click Set All Devices. A pop-up window indicates that the operation was successful.
Figure 1-7