Nortel Networks N300 User Manual

Page 59

Advertising
background image

ymL15wN

aDSL2+/3G wireless N300 4-Port modem Router

www.netcomm.com.au

59

NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router

Consult the table that follows for field descriptions.

Field

Description

Mode

Line Coding format (e.g. G.dmt, G.lite, T1.413, ADSL2)

Type

Channel type (Interleave or Fast)

Line Coding

trellis on/off

Status

Lists the status of the ADSL link

Link Power State

Link output power state.

SNR Margin (dB)

Signal to Noise Ratio (SNR) margin

Attenuation (dB)

Estimate of average loop attenuation in the downstream direction.

Output Power (dBm)

total upstream output power

Attainable Rate (Kbps)

the sync rate you would obtain.

Rate (Kbps)

Current sync rate.

G.Dmt mode the following section is inserted here.

K

Number of bytes in Dmt frame

R

Number of check bytes in RS code word

S

RS code word size in DMT frame

D

the interleaver depth

Delay

The delay in milliseconds (msec)

In aDSL2+ mode the following section is inserted here.

MSGc

Number of bytes in overhead channel

message

B

Number of bytes in Mux Data Frame

M

Number of Mux Data Frames in FEC Data

Frame

T

Max Data Frames over sync bytes

R

Number of check bytes in FEC Data Frame

S

Ratio of FEC over PmD Data Frame length

L

Number of bits in PmD Data Frame

D

the interleaver depth

Delay

The delay in milliseconds (msec)

Super Frames

total number of super frames

Super Frame Errors

Number of super frames received with errors

RS Words

total number of Reed-Solomon code errors

RS Correctable Errors

total Number of RS with correctable errors

RS Uncorrectable Errors

total Number of RS words with uncorrectable errors

HEC Errors

Total Number of Header Error Checksum errors

OCD Errors

total Number of out-of-cell Delineation errors

LCD Errors

total number of Loss of Cell Delineation

Total Cells

Total number of ATM cells (including idle and data cells)

Data Cells

total number of atm data cells

Bit Errors

total number of bit errors

In aDSL2+ mode the following section is inserted here.

Total ES:

total Number of Errored Seconds

Total SES:

total Number of Severely Errored Seconds

Total UAS:

total Number of Unavailable Seconds

Advertising