Napco Security Technologies GEM-DXRP1 - Manual (Page 28)

28
K E Y P AD M E S S AG E S
Alarm condition, followed by zone description(s). “ALARM” and zones will display after
system is disarmed. Note zones, then press
C to clear keypad.
(With pulsing sounder.) Trouble condition on a Fire Zone. Press C to silence
sounder. Correct trouble or call for service.
(With pulsing sounder.) Alarm condition on a Fire Zone. Press C to silence
sounder. Evacuate premises or correct cause of alarm.
(For partitioned systems only.) Code not valid for area.
Wrong code entered or “Easy Bypass” function not enabled.
(In Global Arming Mode). Arming prevented due to unsecured zone. “#” represents
number of area with unsecured zone. Press area number, then
G , then
J
to view
zones in that area. Correct problem, then arm as normal. (For GEM-P1664/3200/9600
panels only).
* * * * A L A R M * * * *
* * * F I R E T R B L * * *
* * * F I R E A L A R M * * *
C O D E D E N I E D
I N C O R R E C T A R E A
I N V A L I D E N T R Y
T R Y A G A I N
C A N ’ T A R M
S Y S T E M /
A R E A # I N T R O U B L E