NEC XM37 - Manual (Page 24)

6
38
37
Reset Control
The Reset control allows you to return image parameters to factory presets.
All Raster Settings
The above warning statement will appear to confirm that you do want to reset
all raster settings. If you want to reset all raster settings, press PROCEED.
The following items can be reset:
H-POSI, H-WIDTH, PIN-CUSHION, PIN-BALANCE, PIN-CORNER, V-POSI,
V-HEIGHT, V-LIN1, V-LIN2, KEYSTONE, TILT and ROTATION.
Specific Item Settings
The above warning statement will appear to confirm that you do want to reset
individual settings.
NOTE:
• In addition to OSM controls, adjustments can be directly accessed with the
remote control keys. When adjusting with the remote control keys, the on-
screen display for the related adjustment appears instead of the OSM
menu.
• When OSM ON/OFF is set at OFF in the System Control menu(see the
following section ), OSM controls are not available while the remote control
direct access is possible.
Specific adjustment
item to be reset.
All Visual Settings
The above warning statement will appear to confirm that you do want to reset all
visual settings. If you want to reset all visual settings, press PROCEED.
The following items can be reset:
BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP.,
R-GAIN, G-GAIN, B-GAIN, R-BIAS, G-BIAS, and B-BIAS.
OSM System Control Menu
The OSM System control menu allows you to set a various conditions of the
monitor.
NOTE: This control is available only when No. 8 pin of the DIP switch is set at
the ON position. The DIP switch is located on the back cabinet.
OSM keys on the remote control unit function as follows:
POSITION CONTROL up/down : highlights one of the control items in the System
control menus.
POSITION CONTROL + : proceeds to the selected menu choice.
POSITION CONTROL - : exits the current control and returns to its original
System control menus.
EXIT : exits the OSM controls.