NEC NC1600C-A - Manual (Page 2)

NEC Display Solutions
500 Park Boulevard, Suite 1100
Itasca, IL 60143
866-NEC-MORE
DLP Cinema and the DLP Cinema logo are registered trademarks of
Texas Instruments. All other brand or product names are trademarks or
registered trademarks of their respective holders.
Product specifications subject to change. 6/09 ver. 1.
© 2009 NEC Display Solutions of America, Inc. All rights reserved.
MODEL NC2500S-A NC1600C-A NC800C
Projection Method 3-chip DMD reflection method
Primary Lenses
For 1.2” DLP Chip: 1.25 to 1.45:1 zoom / 1.45 to 1.8:1 zoom / 1.8 to 2.4:1 zoom / 2.2 to 3.0:1 zoom / 3.0 to 4.3:1 zoom / 4.3 to 6.0:1 zoom
For .98” DLP Chip: 1.3 to 1.75:1 zoom / 1.75 to 2.4:1 zoom / 2.4 to 3.9:1 zoom
Select according to magnifications of installation environment
Lens Adjustment Functions
Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) /
Range of shift is dependent on lens
Light Output
26,000 lumens when using NEC 6.0KW
high-efficiency Xenon lamp bulb
17,000 lumens when using NEC 4.0KW
high-efficiency Xenon lamp bulb
6400 lumens when using NEC lamp bulb
Contrast Ratio Greater than 2000:1 (full on/off) Greater than 2200:1 (full on/off) Greater than 2000:1 (full on/off)
Lamp Bulbs
NEC high-efficiency Xenon (NEC 4.5KW
lamp bulb/NEC 6.0KW lamp bulb) /
Standard film lamp bulbs using adapter
available from NEC
NEC 4.0KW high-efficiency Xenon lamp
bulbs /
NEC 4.0KW long-life Xenon lamp bulb /
Standard film lamp bulbs using adapter
available from NEC
NEC 1.25KW high-efficiency Xenon lamp
bulb
DMD Specifications
1.2” DLP chip, 12º tilt angle
2048 x 1080 pixels
0.98” DLP chip, 12º tilt angle
2048 x 1080 pixels
1.2” DLP chip, 12º tilt angle
2048 x 1080 pixels
DLP Cinema Functions CineLink™, CineCanvas™, CinePalette™, CineBlack™
Cooling Method
• Liquid cooling inside, air cooling with
dust-preventing electrostatic filter
• Total thermal dissipation: 30539BTU
(Input 7KW power to NEC 6.0KW lamp bulb)
• Projector exhaust: 424CFM
• Demand of exhaust duct: 565CFM
• Liquid cooling inside, air cooling with
dust-preventing electrostatic filter
• Total thermal dissipation: 18767BTU
(Input 4KW power to NEC 4.0KW lamp bulb)
• Projector exhaust: 150CFM
• Demand of exhaust duct: 565CFM
• Air cooling with dust-preventing
electrostatic filter
• Total thermal dissipation: 7766BTU
• Projector exhaust: 50CFM
External Controls
PC card slot (for compact flash memory card or wireless LAN card) x 1 / LAN port [RJ-45] x 2 / USB port [Type A] x 1 /
Serial port (RS-232C) [D-sub(9-pin) x 1 / General Purpose I/O [D-sub (37-pin)] x 1 / Remote control connector x 1
Input Terminals HD-SDI port [BNC] x 2 / DVI port [DVI-digital] x 2
Fan Noise Less than 65dB Less than 63 dB 45 dB (when set to low brightness mode)
Power Supply Voltage
Projector head: 200 - 240V AC, 50/60Hz,
single phase
Lamp power supply unit: 200 - 230V/
380 - 415V AC, 50/60Hz, 3 phases
200 - 240V AC, 50/60Hz, single phase
100 - 120V or 200 - 240V AC,
50/60Hz, single phase
Brightness limited to 80% of max when run-
ning from 100 - 120V circuit
Rated Input Current
Projector head: 5A Max
Lamp power supply unit: 28A Max
30A Max
12A Max (100 - 120V)
8.5A Max (200 - 240V)
Power Consumption
Projector head: 950W
Lamp power supply unit: 8000W
5500W
1200 - 1440W (100 - 120V)
1700W (200 - 240V)
External Dimensions (W x D x H)
Projector head: 27.6 x 43.3 x 19.8 in.
Excluding lens, lens hood and exhaust stack
Lamp power supply unit: 23.5 x 15.7 x 18.6
in.
Projector head + pedestal (NEC option):
27.6 x 43.3 x 53.5 in.
Excluding lens, lens hood, exhaust stack and
handle. Including feet.
27.56 x 38.98 x 19.80 in.
Excluding lens, lens hood and exhaust stack.
Including feet.
26.3 x 30.1 x 16.7 in.
Excluding lens, lens hood and handle.
Including feet. Pedestal not supplied by NEC.
Weight
Projector head: Approx. 265 lbs.
Excluding lens.
Lamp power supply unit: Approx. 112 lbs.
Projector head + pedestal (NEC option):
Approx. 564 lbs.
Including lamp power supply unit.
Approx. 218 lbs.
Excluding lens and handle.
Approx. 150 lbs.
Excluding lens. Pedestal not supplied by NEC.
Environment
Operational temperatures: 41 o F - 95 o F
Humidity: 10% - 80% (non-condensing)
Storage temperatures: 14 o F - 122 o F
Humidity: 10% - 80% (non-condensing)
Regulations
USA: UL60950 FCC Class A
Canada: CSA60950 ICES-003 Class A
Standard Equipment
Remote control unit & cable for remote
control unit (629 in.), lens holder to attach
to primary lens, film lamp adapter for 4.0 -
7.0KW film lamp bulbs, user manual
Remote control unit & cable for remote con-
trol unit (629 in.), lens holder to attach to
primary lens, film lamp adapter for 3.0KW
film lamp bulbs, user manual
Remote control unit & cable for remote
control unit (629 in.), lens holder to attach
to primary lens, user manual
Optional Accessories
Pedestal, lamp house module, touch panel
controller and holder arm, film lamp adapter for
3.0KW film lamp bulbs, anamorphic lens x 1.25
and motorized anamorphic lens turret, built-in
alternative content processor, stand-alone alter-
native content processor, optional input boards
for alternative content processor, air filter
Pedestal, lamp house module, touch panel
controller and holder arm, anamorphic
lens x 1.25 and motorized anamorphic lens
turret, built-in alternative content processor,
stand-alone alternative content processor,
optional input boards for alternative content
processor, air filter
Lamp house module with a lamp bulb,
touch panel controller and holder arm,
anamorphic lens x 1.25 and anamorphic
lens turret, stand-alone alternative content
processor, optional input boards for alterna-
tive content processor
Limited Warranty 1 year, parts and labor
Specifications for NC2500S-A/NC1600C-A/NC800C