NETGEAR MA311 - Manual (Page 12)

9
4. Double-click Network Adapter. There should be no yellow exclamation mark or red cross-
sign on the MA311 PCI Adapter selection.
5. Double-click MA311 PCI Adapter. The Device status window should indicate that the
MA311 PCI Adapter is working properly.
The installation of the MA311 PCI Adapter driver in Windows XP is complete. Proceed to Chapter 6:
Wireless LAN Configuration.
Important: By default, Windows XP uses its own utility to configure your wireless network
settings; if you prefer to use the MA311 configuration utility, please change this setting in
the Wireless Networks tab in Wireless Network Connection Properties.