NEC M400 User Manual
Page 16
Advertising
NEC Versa M400/PB EasyNoteM5 M7 Disassembly Manual
Page 16
5. Remove the Side Rubber Covers at the side of the LCD. Release all four screws.
Fig. 20
Remove Side Rubber Cover
6. Carefully lift up LCD panel together with the Inverter board and disconnect the power cable
from the Inverter board. Disconnect the inverter connector remaining on the left side of the
inverter board. Put a side the inverter board.
7. Remove the screws on both sides of the LCD panel in order to release the LCD hinges as
shown in Fig. 21
Fig. 21
Removing the LCD Panel hinges
M2x4 Black
M2x3.5 Black
Advertising