Specifications - as221wm – Nokia AS191WM User Manual
Page 14
English-12
Specifications - AS221WM
Monitor Specifications
AccuSync AS221WM Monitor
Notes
LCD Module
Diagonal:
55.9 cm/22 inches
Active matrix; thin film transistor (TFT)
Viewable Image Size:
55.9 cm/22 inches
liquid crystal display (LCD); 0.282 mm dot
Native Resolution (Pixel Count):
1680 x 1050
pitch; 250 cd/m
2
white luminance, 1000:1
contrast ratio, typical.
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:
Separate sync.TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colours
Analog input:
16,7 M
Depends on display card used.
Synchronization Range
Horizontal:
31.5 kHz to 82.3 kHz
Automatically
Vertical:
56 Hz to 75 Hz
Automatically
Viewing Angle
Left/Right:
-80°/+80° (CR>10)
Up/Down:
-80°/+80° (CR>10)
Resolutions Supported
Landscape:
720 x 400*
1
: VGA text
Some systems may not support all
640 x 480*
1
at 60 Hz to 75 Hz
modes listed.
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 864*
1
at 75 Hz
1152 x 870*
1
at 75 Hz
1280 x 960*
1
at 60 Hz to 75 Hz
1280 x 1024*
1
at 60 Hz to 75 Hz
1440 x 900*
1
at 60 Hz
Recommended resolution is 60 Hz for
1680 x 1050 at 60 Hz.................................. optimal display performance.
Active Display Area
Horizontal:
473.8 mm
Vertical:
296.1 mm
Speakers
Practical Audio Output:
1.0 W + 1.0 W
Power Supply
100 - 240 V ~ 50/60 Hz
Current Rating
0.60 - 0.35 A (with Audio)
Power
Maximun Operation:
32 W
Consumption
Normal Operation:
21 W
Dimensions
Landscape:
505.2 mm (W) x 390.9 mm (H) x 221.8 mm (D)
19.9 inches (W) x 15.4 inches (H) x 8.7 inches (D)
Weight
5.0 kg (11.0 lbs)
Environmental Considerations
Operating Temperature:
5°C to 35°C/41°F to 95°F
Humidity:
20% to 80%
Altitude:
0 to 2,000 m/0 to 6,562 Feet
Storage Temperature:
-10°C to 60°C/14°F to 140°F
Humidity:
10% to 85%
Altitude:
0 to 12,192 m/0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE:
Technical specifications are subject to change without notice.