Sx 35 dsc – NASA SX 35 DSC User Manual
Page 27
SX 35 DSC
25
•
Use the
SELECT
knob to move the cursor to the entry name for edit-
ing.
•
Press the
ENT
key. The
DIRECTORY NAME/ID
screen appears pre-
senting the name and MMSID for the selected directory entry. The blink-
ing cursor is positioned at the start of the entry’s name.
•
Press the
ENT
or
ENT
key. The cursor becomes an underline instead
of a blinking square and moves to the first character position.
•
Use the
SELECT
knob to move the underline cursor to the character
position needing change.
•
Press the
ENT
or
ENT
key. The blinking cursor appears.
•
Use the
SELECT
knob or microphone keys to change the contents of
the character to the new value.
•
When new value is correct, press the
ENT
key or the
ENT
key. If more
characters in the same line need changing, use the
ENT
or
ENT
or
EXIT
key to move the blinking cursor to the next desired character. If no
more changes are desired on the same line, use the
MENU
key to move
the cursor back to the start of the line.
•
When both the name and MMSID are correct, press the
MENU
key to
save the data and exit to the directory listing.
LAMP
Allows adjustment of illumination for the LCD display, keypad and micro-
phone keypad.
•
Press the
MENU
key. Menu topics appear in the display.
•
Use the
SELECT
knob to position the cursor on the
LAMP
topic.
•
Press the
ENT
key. The
BRIGHTNESS
adjust screen appears in the
display.
INT
BRIGHTNESS
________
LO HI