Nokia 9600C - Manual (Page 20)

GB 20
Symbols on the Mediamaster display
No TS No Transport Stream
= No signal.
Channel name.
Signal indicator.
A square means full signal.
? No function.
Err Error message.
UPGRADE
The Mediamaster is busy
downloading new software.
First time Installation
Will start the Installation procedure from the “Welcome Menu”.
When you enter the “Welcome Menu” again and press the
OK button, you should be aware of the fact that all previous
channels and settings will be erased! Press the EXIT button
to leave the menu without making any changes.
Receiver upgrade
If your Service Provider has a new software version available for
the Mediamaster, you can enter this menu and obtain informa-
tion.
If no software is available, you will get the message “No new
software available”.
During downloading periods you are prevented from changing
any settings. The display will show “UPGRADE” during a
download procedure.
IMPORTANT! The update procedure may take up to one hour!
DO NOT turn off the Mediamaster or disconnect the cable to
the antenna input during this procedure!!