Nady Systems MM4 - Manual (Page 8)

I N P U T / O U T P U T S P E C I F I C AT I O N S
TEST CONDITIONS
1. PAN/BAL: Fader at center - Rest of volume settings all at max
2. PAN/BAL: Master fader at center - CH fader at max - Rest of volume at settings "8"
3. For stereo input
4. For a 100
Ω load
5. For stereo output
Input Terminal
Input +1
Sensitivity
Normal +2
Input
Maximum
Sensitivity
Input +3
Impedance
Suitable
Source
Impedance
CH
Input
Level S/W
Level S/W
Level S/W
Level S/W
Level S/W
Effect Return
AUX Input
Effect Sub Input
-6 dBm 0 dBm +17 dBm above 12 K Ω below 1 K Ω
-16 dBm -10 dBm +7 dBm above 12 K Ω below 1 K Ω
-26 dBm -20 dBm -3 dBm above 12 K Ω below 1 K Ω
-51 dBm -45 dBm -28 dBm above 12 K Ω below 1 K Ω
-16 dBm -10 dBm +20 dBm above 12 K Ω below 1 K Ω
-16 dBm -10 dBm +20 dBm above 12 K Ω below 1 K Ω
-10 dBm -10 dBm +10 dBm above 15 K Ω below 1 K Ω
Output Terminal
Master Out
Effect Send
Headphones
Output Terminal Output Terminal Output Terminal Output Terminal
+4 dBm +10.5 dBm 1 K Ω +5 over 5 K Ω
-10 dBm +10.5 dBm 1 K Ω +5 over 5 K Ω
- 50mW+50mW +4 22 Ω over 8 Ω
9