Nextar MM1007 - Manual (Page 10)

ITEM# MM1007
• Video relative menu can be set only when monitor is opened.
• When clock (optional feature) is available, push select button long to display clock.
• Time setting sequence is as follow
a) Push SELECT long to display clock.
b) Push and hold ENTER to enter the time setting
c) Control joystick LEFT/RIGHT or rotate VOLUME to set hour.
d) Press ENTER key to complete setting hour
e) Control joystick LEFT/RIGHT or rotate VOLUME to set minute
f) Push ENTER key to complete setting minute
[12] REMOTE SENSOR
IR Remote control signal receiving window.
[13] OPEN (CLOSE) Button
OPEN THE MONITOR
When power is off, press open button and the unit is turned on and the monitor
opens automatically. If movement of the monitor is hindered by an obstacle, it
returns to its original position automatically.
CLOSE THE MONITOR
If there is an obstacle hindering the closing movement of the monitor when
power is on and the monitor is opened, the monitor will stop its movement. Press
again for closing after removing the obstacle. The monitor should be in the center
position when closing, otherwise it will not be closed.
You can select the option of monitor auto closing or manual-closing by pressing
MENU _ SYSTEM _ TILT and joystick to select either AUTO or MANUAL.. If
AUTO is set and monitor is opened, the monitor is automatically closed when
power is off. If MANUAL is set and the monitor is opened, the monitor will not
close when power is shut off.
9