Lighting instructions, Warning – Napoleon Grills BIPRO 600 User Manual

Page 7

Advertising
background image

7

www.napoleongrills.com

Igniter

Lighting Hole

Off Position

WARNING!

Open lid

WARNING!

Ensure all burner controls are in the off position. Slowly turn on the gas

supply valve.

Main Tube Burner

Lighting

Rear Burner Lighting

Main Infrared Burner

Lighting

Side Burner Lighting

(optional)

1. Open grill lid.

1. Open grill lid.

1. Open grill lid.

1. Open burner cover.

2. Turn left burner control to

high position.

2. Remove warming rack.

2. Turn infrared burner con-

trol to high position.

2. Turn side burner control to

high position.

3. Press and hold igniter

button until burner lights, or

light by match.

3. Turn rear burner control to

high position.

3. Press and hold igniter

button until burner lights, or

light by match.

3. Press and hold

igniter button until burner

lights, or light by match

4. If ignition is not immediate,

turn burner control off. Wait

5 minutes.

Repeat.

4. Press and hold igniter button

until burner lights, or light by

match.

4. If ignition is not immediate,

turn burner control off. Wait

5 minutes.

Repeat.

4. If ignition is not

immediate, turn burner

control off. Wait 5 minutes.

Repeat.

5. With left tube burner

operating on high, turn the

center and/or right tube

burner to high.

5. If ignition is not immediate,

turn burner control off. Wait

5 minutes.

Repeat.

WARNING!

The propane cylinder is equipped with an excess flow device. Unless all burners are turned

off prior to turning the cylinder on, only small flames and low heat will be achievable.

WARNING!

Do not use rear burner while operating main burner.

WARNING!

If lighting the unit with a match, clip the match into the supplied lighting rod.

Hold the lit match down through the grill and sear plate while turning the corresponding

burner valve to high.

Left Tube

Burner

Rear Burner Right Tube

Burner

Center Tube

Burner

Main Infrared

Burner

Lighting Instructions

Advertising