Eizo FlexScan Color LCD Monitor S2242W User Manual

Page 37

Advertising
background image

7

Chapter 5 Reference

Mass

Main unit (including
Height adjustable stand)

Approx. 9.6 kg (21.2 lbs.)

Main unit (including
Tilt stand)

Approx. 7.6 kg (16.8 lbs.)

Main unit (including EZ-
UP stand)

Approx. 11.4 kg (25.1 Ibs.)

Main unit (without stand) Approx. 6.6 kg (14.6 lbs.)

Movable range

Height adjustable stand

Tilt: 40° Up, 0° Down
Swivel: 35° Right, 35° Left
Adjustable height: 82 mm (3.2 inch)
Rotation: 90° (clockwise)

Tilt stand

Tilt: 30° Up, -5° Down

EZ-UP stand

Tilt: 25° Up, 0° Down
Swivel: 172° Right, 172° Left
Adjustable height: 165 mm (6.5 inch)
Rotation: 90° (clockwise)

Environmental
Conditions

Temperature

Operating temperature: 5 °C - 35 °C (41 °F - 95 °F)
Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)

Humidity

Operating humidity: 30% - 80% R.H. (no condensation)
Storage humidity: 30% - 80% R.H. (no condensation)

Pressure

Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa

USB

Standard

USB Specification Revision 2.0

Port

Upstream port × 1, Downstream port × 2

Supply current

Downstream: Max. 500mA/1 port

SW

LCD Panel

22.0-inch (560 mm) TFT color LCD with anti-glare
Viewing angle: Horizontal 178°, Vertical 178° (CR:10 or more)

Dot Pitch

0.247 mm

Horizontal Scan Frequency

Analog: 31-94 kHz
Digital: 31-76 kHz

Vertical Scan Frequency

Analog: 55-76 Hz (Non-interlace)
(1920 × 1200: 55-61 Hz)
Digital: 59-61 Hz (Non-interlace)
(VGA TEXT: 69-71 Hz)

Resolution

1920 dots × 1200 lines

Max. Dot Clock

Analog: 202.5 MHz
Digital: 162 MHz

Max. Display Color

Approx. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10bit LUT)

Display Area (H × V)

473.8 mm × 296.1 mm

Power Supply

100-120 VAC ±10%, 50/60Hz 0.85A
200-240 VAC ±10%, 50/60Hz 0.43A

Power
Consumption

Screen Display On

90W or less (with USB load, Speaker working)
80W or less (without USB load, Speaker not working)

Power saving mode

1.5W or less (for D-Sub single signal input, without USB load, when stereo
mini jack cable is not connected, [Input Signal] : “Manual”)

Power button Off

1W or less (without USB load, when stereo mini jack cable is not
connected)

Main Power switch Off

0W

Input Signal Connector

D-Sub mini 15-pin, DVI-D connector (Applicable to HDCP)

Advertising
This manual is related to the following products: