Navigon MN7 - Manual (Page 38)

User’s manual MN7 PDA
- 38 - Navigation
The map opens in Preview mode. The entire route is visible.
1 The route is marked in orange.
2 Your current position is indicated ().
If you display a planned or loaded route and the specified starting point
is not your current location, then it is possible that your current position
will not be shown on the preview.
3 The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.
4 In a small info box you will see the entire route together with the
estimated trip time and the estimated time of arrival.
You can select to show or hide this information in Options > Settings >
Basic Settings.
If you display a multi-leg route, you will see this information for each leg.
►
Tap on Route Profile in order to view and, if required, change the
settings which form the basis for the route planning.
►
Tap on Start Navigation to start the trip.
If you display a planned or loaded route, the route may be
recalculated. The starting point for the calculation will now be your
current location. You will first be guided to the first route point
entered.
►
Tap on Options > Turn-by-Turn List to view detailed directions for
the route. (Refer to "Turn-by-Turn List” page 46)