Nokia Mediamaster 9828 - Manual (Page 11)

GB 11
Connecting an Satellite Receiver and a VCR
Connecting a HiFi system
• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-
ets on the Mediamaster to the LINE, AUX, SPARE or EXTRA
input sockets on your HiFi system.
• If available you can connect an RCA/Cinch single cable from
the DIGITAL AUDIO socket on the Mediamaster to your HiFi
or Dolby Pro Logic system.
Note: To avoid interference you must use a screened audio
cable.
• Connect a SCART lead between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect a SCART lead between the TV SCART socket on the
satellite receiver and the AUX SCART socket on the
Mediamaster.
• Connect a SCART lead between the VCR and the 2:nd SCART
socket on the TV (if available).
• Connect an RF lead from the RF output on the VCR to the TV
aerial input on the TV.
• Connect an RF lead from the RF output on the satellite receiver
to the RF input socket on the VCR.
• Connect an RF lead from the TV/VCR output on the Media-
master to the RF input socket on the satellite receiver.
• Connect the TV aerial to the TV AERIAL input socket on the
Mediamaster.
• Connect the coaxial cable between the LNB and the LNB
socket on the satellite (analogue or digital) receiver.
Both the VCR and the analogue satellite receiver must be
tuned to different UHF channels than the Mediamaster when
using RF-connectors.
The analogue satellite receiver must be switched to OFF
(standby) when you want to watch digital terrestrial chan-
nels from the Mediamaster.
INSTALLATION OF THE MEDIAMASTER
Satellite receiver
RF
Aerial
RF
SCART
Antenna
Media-
master
VCR