Nortel Networks T1 - Manual (Page 21)

YMLT1WN 3G Travel Router t1 User Guide
www.netcomm.com.au 21
NetComm Liberty Series - 3G Travel Router t1
PPTP
PPTP (Point to Point Tunneling Protocol) allows for a secure connection over the Internet by simply dialing in a local point provided by your
ISP provider. The following screen allows client PCs to establish a normal PPTP session and provides hassle-free configuration of the PPTP
client on each client PC.
Name Description
Server IP address: Type in the server IP address assigned by your Internet Service Provider.
PPTP Account/
Password: Type in the username and password assigned by your provider.
Address Mode: Select Dynamic if your service uses a DHCP server, or select Static and type in the
IP address, Subnet Mask and Default Gateway assigned by your Internet Service
Provider.
Operation Mode; There are 3 options:
‘Keep Alive’ - Keeps the Internet connection alive, does not disconnect.
‘On Demand’ - Only connects to the Internet when there’s a connect attempt
‘Manual’ - Only connects to the Internet when the ‘Connect’ button on this page is pressed,
and disconnects when the ‘Disconnect button is pressed.
MAC Clone: Please input the MAC address of your computer here, if your service provider only
permits computers with a certain MAC address to access Internet. If you’re using
the computer which used to connect to Internet via cable modem, you can simply
press ‘Fill My MAC’ button to fill the MAC address field with the MAC address of your
computer.
Click Apply to save the settings.
WAN Failover Backup
The WAN Failover Backup feature of the 3GT1Wn is designed to provide a backup 3G Internet connection in case your primary connection
should fail. To use this feature, you will need both an Ethernet WAN connection (from an xDSL modem/ISDN/Satellite etc) and a 3G WAN
connection.
To set up WAN failover on your 3G Router, first tick “Enable automatic 3G backup”, then fill in the fields that appear.
Name Description
Internet Host: Enter an Internet address here to check the Internet connection
APN: Enter the APN for your 3G USB modem
User Name: Enter your 3G username
Password: Enter your 3G password
Click Apply to save the settings.