Operating the appliance, Cleaning, Troubleshooting – Bosch MSM 7382 User Manual

Page 6

Advertising
background image

6

Robert Bosch Hausgeräte GmbH

oáëâ=зС=беамку=Скзг=лЬ~кй=Дд~ÇÉëL
кзн~нбеЦ=ЗкбоЙ

kÉîÉê=Цкбй=нЬЙ=Дд~ЗЙ=зе=нЬЙ=ДдЙеЗЙк=ÑççíK=
kÉîÉê ЕдЙ~е=нЬЙ=ДдЙеЗЙк=Дд~ЗЙ=пбнЬ=Д~кЙ=
Ь~åÇëK=rëÉ=~=ÄêìëÜK
fãéçêí~åí>
aз=езн=~нн~ЕЬ=зк=кЙгзоЙ=нЬЙ=ДдЙеЗЙк=Сззн=менбд=
нЬЙ=~ййдб~еЕЙ=бл=~н=~=лн~åÇëíáääK

Operating the appliance

For blending mayonnaise, sauces, mixed drinks,
baby food, cooked fruit and vegetables.
For puréeing soups.
Use the universal cutter for cutting/chopping
raw food (onions, garlic, herbs)!

The hand blender is not suitable
for preparing mashed potatoes.

Before using the appliance for the first time,
clean all parts of it.

Fig. B

Completely unwind the power cord.

Place the blender foot on the base unit
and lock into position.

Insert the mains plug.

Put food in the blender jug or in another
tall jug.
The appliance works better if there is some
liquid in the ingredients.

Set the required speed with the speed
control.
– Rotate to right – reduces the speed.
– Rotate to left – increases the speed.
In general, Turbo speed is recommended
for the processing of food. It is recommended
to use speed control for liquids, hot food and
for mixing (e.g. muesli in yoghurt).
For some models:
The set speed is shown via the speed
indicator when the On button is pressed.
The more segments are lit the higher
is the selected speed.

Firmly hold the hand blender and jug.

Switch on the hand blender by pressing
the required On button.
The hand blender remains switched
on as long as the On button is pressed.
To prevent the ingredients from splashing,
do not press the On button until the blender
foot has been immersed in the ingredients.
Always switch off the hand blender before
taking it out of the processed food.

Release the On button after processing.

Pull out the mains plug.

Press the release buttons and remove
the blender foot from the base unit.

Cleaning

t~кебеЦ>
kÉîÉê=бггЙклЙ=нЬЙ=Д~лЙ=мебн=бе=п~нЙк=~еЗ=
Зз езн=ЕдЙ~е=бе=нЬЙ=ЗблЬп~ëÜÉêK
aз=езн=млЙ=~=лнЙ~г=ЕдЙ~еЙк>
pìêÑ~ЕЙл=г~у=ДЙ=З~г~ÖÉÇK=aç=klq=млЙ=
~Дк~лбоЙ=ЕдЙ~ебеЦ=~ÖÉåíëK

Pull out the mains plug!

Wipe the base unit with a damp cloth
and then wipe dry.

The blender jug can be cleaned in the
dishwasher.

Clean the blender foot in the dishwasher
or with a brush under running water.

Dry the blender foot in an upright position
(blender blade face up) so that any trapped
water can run out.
If processing e.g. red cabbage or carrots,
the plastic parts will become discoloured
by a red film which can be removed with
a few drops of cooking oil.

Troubleshooting

If the fault cannot be eliminated, please contact
customer service.

en

Fault

Remedial action

The appliance
switches off while
it is being used
or the speed
indicator (if fitted)
starts flashing.

The overload protection
feature has been activated.

Switch off the appliance
and pull out the mains
plug.

Leave the appliance to cool
down for approx. 1 hour
in order to deactivate
the overload protection
device.

Switch on the appliance
again.

Advertising