NEC uPD78P078 User Manual
User’s manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- COVER
- Major Revisions in This Edition
- INTRODUCTION
- CHAPTER 1 OUTLINE (uPD78078 SUBSERIES)
- CHAPTER 2 OUTLINE (uPD78078Y SUBSERIES)
- CHAPTER 3 PIN FUNCTION (uPD78078 SUBSERIES)
- 3.1 Pin Function List
- 3.2 Description of Pin Functions
- 3.2.1 P00 to P07 (Port 0)
- 3.2.2 P10 to P17 (Port 1)
- 3.2.3 P20 to P27 (Port 2)
- 3.2.4 P30 to P37 (Port 3)
- 3.2.5 P40 to P47 (Port 4)
- 3.2.6 P50 to P57 (Port 5)
- 3.2.7 P60 to P67 (Port 6)
- 3.2.8 P70 to P72 (Port 7)
- 3.2.9 P80 to P87 (Port 8)
- 3.2.10 P90 to P96 (Port 9)
- 3.2.11 P100 to P103 (Port 10)
- 3.2.12 P120 to P127 (Port 12)
- 3.2.13 P130 and P131 (Port 13)
- 3.2.14 AVREF0
- 3.2.15 AVREF1
- 3.2.16 AVDD
- 3.2.17 AVSS
- 3.2.18 RESET#
- 3.2.19 X1 and X2
- 3.2.20 XT1 and XT2
- 3.2.21 VDD
- 3.2.22 VSS
- 3.2.23 VPP (uPD78P078 only)
- 3.2.24 IC (Mask ROM version only)
- 3.3 Input/output Circuits and Recommended Connection of Unused Pins
- CHAPTER 4 PIN FUNCTION (uPD78078Y SUBSERIES)
- 4.1 Pin Function List
- 4.2 Description of Pin Functions
- 4.2.1 P00 to P07 (Port 0)
- 4.2.2 P10 to P17 (Port 1)
- 4.2.3 P20 to P27 (Port 2)
- 4.2.4 P30 to P37 (Port 3)
- 4.2.5 P40 to P47 (Port 4)
- 4.2.6 P50 to P57 (Port 5)
- 4.2.7 P60 to P67 (Port 6)
- 4.2.8 P70 to P72 (Port 7)
- 4.2.9 P80 to P87 (Port 8)
- 4.2.10 P90 to P96 (Port 9)
- 4.2.11 P100 to P103 (Port 10)
- 4.2.12 P120 to P127 (Port 12)
- 4.2.13 P130 and P131 (Port 13)
- 4.2.14 AVREF0
- 4.2.15 AVREF1
- 4.2.16 AVDD
- 4.2.17 AVSS
- 4.2.18 RESET#
- 4.2.19 X1 and X2
- 4.2.20 XT1 and XT2
- 4.2.21 VDD
- 4.2.22 VSS
- 4.2.23 VPP (uPD78P078Y only)
- 4.2.24 IC (Mask ROM version only)
- 4.3 Input/output Circuits and Recommended Connection of Unused Pins
- CHAPTER 5 CPU ARCHITECTURE
- CHAPTER 6 PORT FUNCTIONS
- CHAPTER 7 CLOCK GENERATOR
- CHAPTER 8 16-BIT TIMER/EVENT COUNTER
- CHAPTER 9 8-BIT TIMER/EVENT COUNTERS 1 AND 2
- CHAPTER 10 8-BIT TIMER/EVENT COUNTERS 5 AND 6
- CHAPTER 11 WATCH TIMER
- CHAPTER 12 WATCHDOG TIMER
- CHAPTER 13 CLOCK OUTPUT CONTROL CIRCUIT
- CHAPTER 14 BUZZER OUTPUT CONTROL CIRCUIT
- CHAPTER 15 A/D CONVERTER
- CHAPTER 16 D/A CONVERTER
- CHAPTER 17 SERIAL INTERFACE CHANNEL 0 (uPD78078 SUBSERIES)
- CHAPTER 18 SERIAL INTERFACE CHANNEL 0 (uPD78078Y Subseries)
- CHAPTER 19 SERIAL INTERFACE CHANNEL 1
- CHAPTER 20 SERIAL INTERFACE CHANNEL 2
- CHAPTER 21 REAL-TIME OUTPUT PORT
- CHAPTER 22 INTERRUPT FUNCTIONS
- CHAPTER 23 EXTERNAL DEVICE EXPANSION FUNCTION
- CHAPTER 24 STANDBY FUNCTION
- CHAPTER 25 RESET FUNCTION
- CHAPTER 26 ROM CORRECTION
- CHAPTER 27 uPD78P078, 78P078Y
- CHAPTER 28 INSTRUCTION SET
- APPENDIX A DIFFERENCES BETWEEN uPD78078, 78075B SUBSERIES, AND uPD78070A
- APPENDIX B DEVELOPMENT TOOLS
- APPENDIX C EMBEDDED SOFTWARE
- APPENDIX D REGISTER INDEX
- APPENDIX E REVISION HISTORY