Northern Industrial Tools M1578112A - Manual (Page 9)

Assembly Instructions
9
III.) Handle Assembly
1.) Attach handle to base with two carriage bolts and t-handle knobs.
2.) Spin a flange nut backwards onto the gun hook. (see hook detail)
3.) Mount the hose hook onto the handle and gun hook onto base as shown.
4.) Insert grommets into the holes on the handle nameplate.
5.) Press nozzles into grommets according to the colors indicated on the handle decal.
Gun Hook
Flange nut
Hose hook
(Position A)
T-handle knob
Carriage bolts
Gun Hook Detail
Flange nut
Nozzles
(Quantities vary
by model)
Grommets
Handle
Hose hook
(Position B)
GC models only
Nylock nut