Nextar N1-501 - Manual (Page 3)

6. Once the unit is in the “updating” mode,
go to your START/ALL PROGRAMS
menu and look for the newly installed
program group. It should be called
“Photo Viewer”
7. Go to this new program group and
double click the Photoviewer icon to
open the program
8. Once open, you should see a program
screen similar to the one below:
9. To add pictures to your Mini Photo
Album from your PC, navigate to the
image on your PC using the controls on
the left-hand side of the Photoviewer
software
10. Select the photo you want to add by
clicking on it once.
11. Then click the blue arrow (circled on the
image as “1”) to POST the image to the
keychain.
12. Then to finalize the transfer, click the
SYNCHRONIZE button (circled on the
image as “2”) to make the transfer
complete
13. You can delete images on the Photo
Key-Chain by selecting them, pressing
the DELETE button and then the
synchronize button
Once you have completed the transfer of
images to your Keychain Photo Album, exit
the Photoviewer software and remove your
unit from your PC by disconnecting the USB
cable from your Photo Album first and then
from your PC.
To turn on the Photo Album, press the MENU
button for 2 seconds.
To flip through images stored on your Photo
Album, use the UP / DOWN buttons.
Detailed Instructions:
Supported graphic formats
• BMP
• JPG
• GIF
Button Functions
1. Reset
2. UP
3. MENU
4. DOWN
NOTE: If the unit stops functioning properly, press the reset
button for 2sec, then turn the unit back on
2
1
This side shows images
installed on your Mini
Photo Album This side shows the
navigation of
images on your PC